SG300-10 : Mode switch et mode routeur
Passer en mode switch
Le périphérique se comportera comme un switch (L2)
switch93112e#set system mode switch Changing the switch working mode will *delete* the startup configuration file and reset the device right after that. It is highly recommended that you will backup it before changing the mode, continue ? (Y/N)[N] Y switch93112e#10-Oct-2013 17:22:55 %FILE-I-DELETE: File Delete - file URL flash://startup-config Resetting local unit ************************************************** ***************** SYSTEM RESET ***************** *********************** **************************
Après le redémarrage, visualisez la configuration :
switch93112e#show startup-config ... set system mode switch ...
Passer en mode router
Le périphérique se comportera comme un switch-router (L3)
switch93112e#set system mode router Changing the switch working mode will *delete* the startup configuration file and reset the device right after that. It is highly recommended that you will backup it before changing the mode, continue ? (Y/N)[N] Y switch93112e#10-Oct-2013 17:22:55 %FILE-I-DELETE: File Delete - file URL flash://startup-config Resetting local unit ************************************************** ***************** SYSTEM RESET ***************** **************************************************
Après le redémarrage, visualisez la configuration :
switch93112e#show startup-config ... set system mode router ...